1 La precisione planimetrica (scarto tipo in cm) per un punto definito esattamente sul terreno è:
GT2 | GT3 | GT4 | GT5 |
3,5 | 7 | 15 | 35 |
2 La precisione planimetrica (scarto tipo in cm) per un punto non definito esattamente sul terreno, ai bordi di una strada, di un torrente o lungo una cresta, ecc., è:
GT2 | GT3 | GT4 | GT5 |
20 | 35 | 75 | 150 |
3 La precisione dei metodi di misurazione e di calcolo e la precisione planimetrica raggiunta a posteriori devono essere dimostrate numericamente per ogni punto.
4 Il limite di tolleranza ammesso per la valutazione di singoli errori è uguale al triplo dello scarto tipo calcolato secondo la formula dei capoversi 1 e 2.
1 The planimetric accuracy (standard deviation in cm) of a precisely defined point on the ground is as follows:
TS2 | TS3 | TS4 | TS5 |
3.5 | 7 | 15 | 35 |
2 The planimetric accuracy (standard deviation in cm) of points along road edges, stream banks, ridges, etc., which are not precisely defined on the ground, is as follows:
TS2 | TS3 | TS4 | TS5 |
20 | 35 | 75 | 150 |
3 The accuracy of the surveying and computation methods and the achieved a posteriori planimetric accuracy must be demonstrated computationally for every point.
4 The tolerance limit for the assessment of individual discrepancies is three times the standard deviation given in para. 1 or 2 above.
Il presente documento non è una pubblicazione ufficiale. Fa unicamente fede la pubblicazione della Cancelleria federale. Ordinanza sulle pubblicazioni ufficiali, OPubl.
This document is not an official publication. Only the publication of the Federal Chancellery is legally binding.